Static Analysis of Collision Strength of Offshore Platform

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Underice Operation of SJT-5 ROV

- The authors have used a low-cost ROV of observation type for underice surveying of the Nen-Jiang Cross-river oil pipe line in the Da Qing oil field. The operation method, process and the safety measures for severe cold areas are presented. The fruitful tries and experience may be useful to ROV operators in severe cold areas.     

Hydroelastic Analysis of Very Large Floating Structures Using Plate Green Functions

1 .IntroductionRecentlygreatinteresthasbeenshowninthedevelopmentofverylargefloatingstructuressuchasMegaFloatofJapan (Isobe ,1 999)andMOBofUSA (Remmers ,1 999) .Owingtotheirextremelargesizeandgreatflexibility ,thecouplingbetweenthestructuraldeformationandfluidmotionissignifi cant.Thisisatypicalproblemofhydroelasticity .Efficientandaccurateestimationofthehydroelasticresponseofverylargefloatingstructuresinwavesisveryimportantfordesign .Manymethodshavebeenproposedinliteratureforthepredictiono…     

沿海与内陆地下卤水对比分析

分析对比我国滨海与内陆地下卤水的分布、成因及其水文地球化学特征，指出不同成因的地下卤水具有不同的水质．     

风力对内陆浅水水域磷水平的影响

本文通过对平度市大泽山水库(面积约0.5平方公里,平均水深约1.5米)的实地观测,研究了风力对内陆浅水水域磷水平的影响。结果表明,影响程度取决于风速、风力作用时间、水深以及风力作用前磷水平的高低等因素。就大泽山水库而言,风速大于2.5米/秒的风力可引起各种形态磷的明显增加。不过对磷酸盐磷来说,如果浓度本来就较高,风力作用下当有大量沉积物颗粒泛起时,会对PO_4~≡产生吸附,因而可能导致水中游离磷酸盐磷含量下降。鉴于此,作者建议对内陆浅水水域进行磷水平调查时应考虑风力的作用。     

CHIMEHERB人工皮使用的体会

从1989年4月～1990年10月,我科在69例病人中使用CHIMEHERB人工皮,覆盖治疗了供皮区,Ⅱ°烧伤创面、脱痂创面的残余肉芽创面.临床应用表明:CHIMEHERB人工皮能加快创面的愈合,是目前较好的一种创面覆盖物,用人工皮覆盖创面2～3天后,人工皮干燥,不需再换药,可减轻病人的痛苦.     

波群作用于垂直桩柱的峰力统计性质

研究具有窄谱和Ｗｅｉｂｕｌｌ波高分布的波群对非线性桩柱系统作用力的统计性质。求得了桩桩的波浪峰力的各种特征值及其比值。指出这些数值不仅是阻力一惯性力参数ｂＨ的函数，也随着波群因子而变化。本文模式更具广泛性。文中给出了一系列计算图表，可从理论计算波群作用于桩柱的波浪峰力。